COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
431
Settings – Réseaux publics
Connexions analogiques
Fin d’appel
Reconnaissance de la tonalité occupée (appels entrants)
Reconnaissance de la tonalité occupée (appels sortants)
The PBX recognises the busy signal sent by the public exchange.
It needs this to identify that the call connection has finished and to automat-
ically disconnect an ISDN phone.
Note:
Disable this setting if the PBX identifies disruptions on the external
line as the busy signal, because this would cause it to interrupt conver-
sations. In this situation, the subscriber must signal to the PBX that the
call is ended by disconnecting.
Longueur minimale de la tonalité occupée (3-20 secondes)
The minimum length of the busy signal specifies the time (in seconds) the
PBX takes to identify a busy signal sequence. This prevents, for example,
the PBX identifying speech as a busy signal.
Tonalité continue
Requirements:
•
The PBX must recognise the continuous tone sent by the network
provider as the end of the call
The PBX recognises the continuous tone sent by the network provider
as the end of the call connection.
