Auerswald COMpact 5200 Advanced Information Download

Page: 209 / 1114

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

209

Functions, Uses, Concepts

VoIP

VoIP

The transmission quality and the reliability of Voice over IP depends to a
great extent on the quality of the Internet connection used.

Configuring External Internet Telephony

Requirements:

•

External VoIP channel (optoptional, see Technical Data in the Instruc-
tions)

•

An account with a VoIP provider

•

Configured internal subscribers

Configure the PBX as follows:

1. Configure at least one VoIP channel as an external VoIP channel.

2. Make sure you have current VoIP provider data:

•

Check previously configured provider data.

•

Download and import provider data from the Internet.

•

Enter provider data manually.

3. Configure the DNS server.

4. Create at least one VoIP account in the PBX and enter the account and

access data.

5. Enter your own VoIP phone numbers.

Summary of Contents for COMpact 5200



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5200

Reviews:

Related manuals for COMpact 5200

Brands by name

Popular brands

Auerswald COMpact 5200, Advanced Information

Search results

Summary of Contents for COMpact 5200

Reviews:

Related manuals for COMpact 5200

Brands by name

Popular brands