170
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
Call Distribution
Call Distribution
In call distribution, you specify which internal subscribers should be given
the signal for an incoming external call. This means that in call distribution,
you specify, e.g., permanently, which internal phones should ring when you
are called. Call distribution for each phone number is configured individually
on a connection with multiple external numbers (e.g., ISDN connection).
You can configure both one phone for multiple phone numbers and multiple
phones (group) for one phone number to ring.
Requirements:
•
Configured external numbers:
–
Using the Configuration Manager (on the following pages)
– Réseaux publics > Connexions RNIS
– Réseaux publics > Voix sur IP (VoIP)
•
Configured internal numbers:
–
Using the Configuration Manager (on the following pages)
– Abonnés (Abo) > Numéros de téléphone
– Groupes > Numéros de téléphone
Proceed as follows for configuration:
•
Creating the call distribution.
–
Using the Configuration Manager (page
Réseaux publics > Achem-
inement des appels
)
•
Setting the fallback.
–
Using the Configuration Manager (page
Réseaux publics > Achem-
inement des appels
)
