Auerswald COMpact 5000R Advanced Information Download

Page: 92 / 1388

Activation

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 92 -

Activation

Basic assembly

The following unlockable functions/resources are already available in the

PBX:

• 4 VoIP channels for internal IP and Internet telephony (SIP-compliant

in accordance with RFC 3261; support for VoIP Codecs G.711, iLBC)

• 1 voice mail channel for voice mail functions with one voice mailbox

• 10 configurations

• 18000 call data records

• Project-related calls (project numbers)

• Call Through calls (Call Through for all lines)

• LAN-TAPI for 4 subscribers

• LCR for all subscribers

Important:

Operating the PBX without system release is not possible.

Important:

It is not possible to use the voice mail channel without

inserted USB memory stick (not included in the scope of delivery).

Important:

Using the voice mail channel will result in the loss of one

VoIP channel.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands