Auerswald COMpact 5000R Advanced Information Download Page 805

Page: 805 / 1388

Basic Settings

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 805 -

Basic Settings

Proceed as follows:
• Separately for profiles
• Using the Configuration Manager
• Profile-related (page

Groupes > Profils > Configuration >

Configurer

)

Configuration de profil

Select the profile you want to display/configure.

• Function-related (page

Groupes > Profils > Synthèse des

fonctions

)

Configurer

Opens the configuration of the single function for all profiles.

Réglage commandé par le profil

The profile setting overrides the group setting.

Note:

When switched off, the setting under

Groupes > Propriétés

applies.

Schéma de sonnerie après
Tous

All subscribers logged-in to the group will ring simultaneously. Selected

subscribers will start to ring after the configured delay time (

après

). If a

call was not accepted, although all logged-in members of the group were

called, the call would be finished with a busy signal.

Tous - groupe fractionné

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands