Auerswald COMpact 5000R Advanced Information Download Page 794

Page: 794 / 1388

Managing Unassigned Phones

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 794 -

Managing Unassigned Phones

Phones that are still to be used on the PBX can here be assigned to a

subscriber.
Phones that are not in use, not connected or not assigned to a subscriber

should be removed from the list.
Proceed as follows:
• Using the Configuration Manager (page

Abonnés (Abo) >

Téléphones non attribués

)

Select the line of the phone to be removed in the register

Téléphones

VoIP

Téléphones divers

and click

Supprimer

or
Assign a subscriber to a VoIP phone in the list field to the right of the

corresponding VoIP phone.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands