Auerswald COMpact 5000R Advanced Information Download

Page: 740 / 1388

Using the Configuration Manager to Switch On the Login Mode of a COMfortel DECT 900 Base

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 740 -

Using the Configuration Manager to Switch On the
Login Mode of a COMfortel DECT 900 Base

If the login mode of a COMfortel DECT 900 Base is enabled, up to five

mobile handsets can be logged in to the base station.

Note:

A maximum of three mobile handsets are recommended for a

COMfortel DECT 900 Base because only three mobile phones can be
called at the same time.

Proceed as follows:
• Using the Configuration Manager

Requirements:
• COMfortel DECT 900 Base connected to the internal S

port

• COMfortel DECT 900/900C Handsets
• Configured internal numbers for the COMfortel DECT 900/900C

Handsets

1. Open the page Abonnés (Abo) > COMfortel DECT.

2. Select the DECT base in the list field under Base DECT.

3. Select or clear the check box under Activer le mode de connexion.

4. If you have enable the registration mode, click Enregistrer to

enable the registration mode.
The paging key on the COMfortel DECT 900 Base starts blinking.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands