Auerswald COMpact 5000R Advanced Information Download

Page: 681 / 1388

Call Forwarding

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 681 -

Call Forwarding

GENERAL SETTINGS FOR CALL FORWARDING
Méthode de transfert d’appel

Call forwardings at the exchange line are configured and performed in

different ways. The exchange line, router or the provider determines which

of the call forwardings listed below can be used.

Clavier

The call forwarding is controlled in the PTMP exchange line. The digit

sequence depends on the provider or router.

Call Defelection

Call forwarding shall be executed directly by the exchange line. The PBX

sends a corresponding message with new destination number to the

exchange line. Accordingly, the call is forwarded to the new destination by

the provider/exchange line.

Note:

Currently, providers support Call Deflection only at the SIP

Trunk.

2. B channel

The call forwarding is performed by the PBX during a call. It is possible for

all exchange line types but requires a free voice channel and the number

of the caller cannot be displayed unless CLIP no scrrening is used which

is not supported by many providers.

For call forwarding via the PBX, use any available call channel

Requirements:
• Enabled call forwarding method

2. B channel

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands