Auerswald COMpact 5000R, Advanced Information

Page: 656 / 1388

Location/Access Data
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 656 -
Location/Access Data
Proceed as follows:
• Separately for VoIP accounts
• Using the Configuration Manager (page
Réseaux publics > VoIP >
Comptes > Configurer )
Note: You will receive the settings data from the VoIP provider with
whom you have set up the account.
Compte
Select the account to be displayed/configured.
Codes d’accès à la ligne principale (numéro de compte)
This is an internal number. You can select any of the numbers in the
internal supply of phone numbers. This is then used for the specific VoIP
access point.
Note: A number cannot be allocated twice.
Note: Using numbers with few digits (two- or three-digit numbers)
inevitably restricts the possible supply of numbers that require more digits.
For example, if the phone number 12 is assigned, the phone numbers 120
to 129 and 1200 to 1299 are no longer available.
Note: The default exchange line access number on the PBX is 0 in the
factory settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.