Auerswald COMpact 5000R Advanced Information Download Page 650

Page: 650 / 1388

Evaluation of Incoming SIP Messages

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 650 -

Evaluation of Incoming SIP Messages

Proceed as follows:
• Separately for VoIP providers
• Using the Configuration Manager (page

Réseaux publics > Voice

over IP (VoIP page) > Fournisseur > Configurer

)

Note:

You can obtain the data for the settings either directly from the

VoIP provider or from suitable lists in the Internet.

Requirements:
• For entering a URL: configured DNS server
• For using a STUN server: IP operating mode IPv4

Fournisseur

Select the provider to be displayed/configured.
The phone numbers of incoming VoIP calls listed in the call data list

usually need to be converted before they can be used for callbacks.

Note:

To check these settings, direct incoming exchange line calls

via this VoIP provider, e.g. using a mobile phone, and check the phone
number sent along with the call in the call data list (in

Données des

utilisateurs > Liste des appels

Note:

To identify the user-defined settings, select an incoming

call under

Surveillance > Flux de données réseau

and view it in the

Wireshark programme. Select the options you require in the list fields
under

Hiérarchisation des recherches (description Wireshark)

. The

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 650 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: