Auerswald COMpact 5000R Advanced Information Download Page 625

Page: 625 / 1388

Management of the VoIP Provider

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 625 -

Management of the VoIP Provider

Proceed as follows:
• Using the Configuration Manager (page

Réseaux publics > VoIP >

Fournisseur

)

Configurer

Opens the configuration of the VoIP provider.

Nouveau

Adds a new provider to the list of providers. You must then make the

settings for the VoIP provider.

Supprimer

Deletes the entries marked in the list.

Importer

Importer le fournisseur

Requirements:
• PC or PBX with existing connection to the Internet
A file with individual provider access data (*.XML) will be downloaded from

the update server. Depending on the Internet connection, this file is then

either saved to a data storage device (PC) or directly to the PBX.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands