Routage
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 608 -
Routage
Important:
The expert settings for the ISDN connection are
settings that should only be changed if e. g. country or provider-specific
particularities make it absolutely necessary.
Proceed as follows:
• Separately for PBX base number
• Using the Configuration Manager (page
Réseaux publics > RNIS >
Numéro Principal d’abonnement/Faisceau (NDI) > Configurer
)
Requirements:
• Configured PBX base number
Utiliser Soft-LCR 4.0 pour ce raccordement
Requirements:
• Network provider must support the dial-around service
• Configured prefixes (country prefix and local area code)
• Configured LCR (see
)
The ISDN connection is used for LCR calls.
Note:
LCR must be disabled if the network provider does not support
LCR.
Note:
However, you can always perform LCR manually by dialling a
provider area code prefix if the network provider supports the dial-around
service.
Summary of Contents for COMpact 5000R
Page 1: ...V13 06 2019 COMpact 5000 R Advanced Information ...
Page 224: ...Tones COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 224 ...
Page 1278: ...B COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1278 B B Channel B Channel ...
Page 1385: ...W COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1385 W WAN WAN ...