Auerswald COMpact 5000R, Advanced Information

Page: 558 / 1388

Start of Call (Outgoing Calls)
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 558 -
Start of Call (Outgoing Calls)
Proceed as follows:
• Separately for analogue ports
• Using the Configuration Manager (page
Réseaux publics >
Analogique > Numéros de téléphone > Configurer )
Requirements:
• External analogue port (optional, see Technical Data in the
Instructions)
Connexion analogique
Select the analogue connection to be displayed/configured.
Temps d’attente après composition du dernier chiffre
(1-30 secondes)
Note: This setting is only relevant when the setting send # is enabled.
The waiting time serves for post-dialling digits before the PBX recognises
that dialling has been finished and sends # to the exchange line. #
signalises the exchange line that the number sequence is completed.Time
measurement restarts after the entry of each digit. The possibilty of
post-dialling digits is not applicable if the PBX has recognized that the
number sequence is already completed and automatically sends # to the
exchange line.
Note: Select as short a time as possible, because the PBX does not
forward the last number to the public exchange until the specified time has
passed.