Auerswald COMpact 5000R, Advanced Information

Page: 556 / 1388

Line Connection
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 556 -
Line Connection
Proceed as follows:
• Separately for analogue ports
• Using the Configuration Manager (page
Réseaux publics >
Analogique > Numéros de téléphone > Configurer )
Requirements:
• External analogue port (optional, see Technical Data in the
Instructions)
Connexion analogique
Select the analogue connection to be displayed/configured.
Attente de tonalité
Before the PBX dials a phone number it checks whether a dial tone has
been sent from the public exchange. It starts dialling as soon as it detects
a dial tone for 200 milliseconds
This function prevents the PBX dialling the wrong number by starting
dialling too early if the public exchange takes too long to play the external
dial tone it generates.
Note: Disable this setting if the dial tone cannot be sent clearly by the
public exchange and, as a result, cannot be identified by the PBX.
Temps d’attente (3-30 secondes)
The waiting time for a line connection setting specifies the time (in
seconds) after which the PBX stops establishing the connection if it does
not recognise a dial tone, although the wait for dial tone setting is enabled.