Auerswald COMpact 5000R Advanced Information Download

Page: 538 / 1388

Signalling Tones

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 538 -

Signalling Tones

Proceed as follows:
• Using the Configuration Manager (page

Réseaux publics > Indicatif

)

Note:

Some of the following settings can also be configured seperately

for connections/accounts.

Tonalité

Tonalité d’appel

Tonalité d’occupation

Depending on the location of the PBX, the signalling tones are

correspondingly preconfigured but they can also be changed. For these

tones, only the frequencies 400, 425, 440 and 450 Hz are possible. Tones

differing from these frequencies are rounded to the nearest frequency.

Note:

Do not change the preconfigured values for dial tone, ringer and

busy tone unless you are told to do so by our support staff.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands