Auerswald COMpact 5000R Advanced Information Download Page 527

Page: 527 / 1388

2BRI

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 527 -

2BRI

Proceed as follows:
• Using the Configuration Manager (page

Matériel > Configuration du

port

)

Note:

If the settings for the module are marked in red, the module is

selected but not inserted.

Note:

The numbers under

Port

correspond to the numbers used on

the board.

Utilisation

Set the use of the ISDN ports.

libre

Port is not used and port is not taken into account for the calculation of the

total number of existing ports/call channels.

internal S0

Port is used as internal S

port.

internal UP0

Port is used as internal U

port.

externe

Port is used as external port.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Brands by name

Popular brands