Auerswald COMpact 5000R Advanced Information Download Page 512

Page: 512 / 1388

Statut abonnés internes

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 512 -

Statut abonnés internes

Proceed as follows:
•

Using the Configuration Manager (

Surveillance > Statut

abonnés internes

)

Display of registration (IP and ISDN phones), connection (analogue

phones) and provisioning of subscribers, door terminals and (not yet)

assigned devices by a coloured dot.

Note:

The page initially displays the status when the page is opened

and will automatically be updated every 30 seconds.

Note:

Not all status information can be updated automatically (see

following sections).

Status analogue phones

Unknown analogue phone.

Connected analogue phone with date of last activity time.

Note:

After connecting an analogue phone, the receiver must be

picked up for correctly displaying the phone status. The monitoring page
should then be updated.

Note:

The PBX cannot automatically recognize the removal of a

device. It’s hardware status can be reset under

Abonné > Propriétés >

Paramètres de base > Réinitialiser le statut du matériel

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands