Auerswald COMpact 5000R Advanced Information Download Page 450

Page: 450 / 1388

Accès administrateur

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 450 -

Accès administrateur

Proceed as follows:
• Using the configuration wizard (

> Dealer and operator data

)

Administrator access > Modifier

Requirements:
• Knowledge of the current admin password
The user data for the administrator access are used for administrator

registration on the PBX.

Note:

Changes at the administrator access are only possible with an

encrypted HTTPS connection.

Note:

After a change, a new regisration is required.

Nom d’utilisateur admin

Consists of up to 32 characters containing digits, letters (upper and lower

case, but no umlauts and ß).

Modifier le PIN admin

Enables the input option (6 characters (digits)) for

PIN admin

and

PIN

admin (confirmation de la saisie)

(e. g. for access to COMfortel Set).

Note:

All PINs in the PBX are unambiguous. Therefore, you cannot

assign the same PIN twice.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands