Auerswald COMpact 5000R Advanced Information Download

Page: 350 / 1388

Information on the Chapter

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 350 -

Information on the Chapter

This section includes an alphabetical list of functions and settings of the

PBX you can configure using an internal or, in some cases, an external

phone. The functions available in the menu of the system phones as well

as the menu functions or keys used by individual ISDN phones are not

listed (see manual for the phone).
The headlines explain which device may be used for the named character

string. If the column is limiting the character string (e.g. for starting a

conference) to analogue phones only it may be available to ISDN phones

via menu (see manual of the phone).
Is the function also available to external devices a remote switching

number configured in the PBX has to be dialled first.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands