Auerswald COMpact 5000R, Advanced Information

Page: 345 / 1388

Initiating Toggling between Conversations during a Conference Call
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 345 -
Initiating Toggling between Conversations during a
Conference Call
When you end a conference call and want to talk to each of the
conference call partners separately one after the other, you can
specifically put one of the conference call partners on hold in the
background.
Requirements:
• A conference call that you initiated yourself
During a conference call, proceed as follows:
• Press the
Flash key (when using a phone with DTMF dialling) or the
Query key (when using an ISDN phone) and dial 2.
You then make an individual call with the communication partner who
had previously been active. The other subscriber of the conference
hears the hold music.
• Press the Flash key or the Query key and dial 1.
You then make a call with the communication partner who had
previously been on hold in the background. The other subscriber of the
conference hears the hold music.
Important: To use this function on ISDN and system phones, the
function must be supported via a function key or via the menu by the
respective phone (optional, see manual for the phone).
Note: You also can use this function this function on analogue phones,
where it can be performed via the T-Net function key/menu (optional, see
manual for the phone).