manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 325 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 325

Ending a Query Call

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 325 -

Ending a Query Call

If you make a query call and the number is busy but there is no response,

proceed as described in one of the following steps.
• The subscriber called for the query call does not respond: Press the

Flash key

 or the 

Query key

 and dial 1.

You are now reconnected with the person waiting on the other line.

• The subscriber called for the query call is busy. Wait.

You will automatically be reconnected with the communication partner

waiting on the other line.

Note:

 On ISDN and system phones, this function is performed via a

function key or via the menu (optional, see manual for the phone).

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments