Auerswald COMpact 5000R, Advanced Information

Page: 323 / 1388

Initiating a Query Call
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 323 -
Initiating a Query Call
Requirements:
• For a query call with two external communication partners: at least two
external call channels
During a call, proceed as follows:
1. Press the Flash key or the Query key .
2. Enter a phone number. Possible entries:
Internal number of the individual phone
(for exchange line request
type Direct exchange line phone: with preceding **)
Internal number of the group
(for exchange line request type Direct
exchange line phone: with preceding **)
Internal number of the door
(for exchange line request type Direct
exchange line phone: with preceding **)
External number
(for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number
(for exchange line request type Direct exchange
line phone: with preceding **)
The subscriber is called.
Note: After pressing the Flash key or the Query key , you can also
initiate other call types (e. g. private calls), an InterCom announcement,
or a pick-up. Exception: During a door call only the dialling of one phone
number is possible.