Auerswald COMpact 5000R, Advanced Information

Page: 300 / 1388

Initiating Targeted Exchange Line Access
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 300 -
Initiating Targeted Exchange Line Access
Using targeted exchange line access, you can define which external
exchange line and own external number is transmitted for an external call.
Proceed as follows:
• Using a character string on the internal phone
• Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
• External S
0
port, external analogue port (optional, see Technical Data
in the Instructions)
1. Pick up the receiver.
2. Dial ##96.
3. Enter the separate external number to be transmitted. Possible entries:
External numbers
4. Dial *.
5. Enter an external number. Possible entries:
External number (for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number (for exchange line request type Direct exchange
line phone: with preceding **)
The subscriber is called.