Auerswald COMpact 5000R, Advanced Information

Page: 284 / 1388

Taking over a Call (Call Take-over)
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 284 -
Taking over a Call (Call Take-over)
If the answering machine has already taken the call, you can perform a
call take-over to take the call on your own phone.
Proceed as follows:
• Using a character string on the internal phone
• Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
•
Transfert d’appel enabled for the subscriber
• To perform call take-over of an external call: Discrimination assigned
to the subscriber for incoming calls ( International , National , Localité
or Entrants uniquement, avec appel d’urgence )
If the answering machine has already taken the call, proceed as follows:
1. Pick up the receiver.
Note: During an existing call press the Flash key or the Query key .
2. Dial ##06.
3. Enter the internal number of the answering machine that is conducting
the call to be picked up. Possible entries:
Internal number of the individual answering machine (for
exchange line request type Direct exchange line phone: with preceding
**)