Auerswald COMpact 5000R Advanced Information Download

Page: 277 / 1388

Central Caller List

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 277 -

Central Caller List

The phone numbers of unaccepted calls are stored in the caller list on the

system phone (optional, see phone manual). As soon as a connection

(incoming or outgoing) has been made to a caller, the corresponding

phone number is automatically deleted from the caller list.
If a group call occurred and if the central caller list for groups is enabled,

the phone number is also deleted from the caller lists of the other

members of the group.

Note:

Group-wide deletion does not occur if the person calling back

has already deleted his caller list or has been called again by the same
caller on his subscriber number.

Requirements:
• All group members are system phones, that support the central caller

list (optional, see the phone manual)

Proceed as follows for configuration:

• Switching the central caller list for the involved groups on.

- Using the Configuration Manager (page

Groupes > Propriétés >

Paramètres

)

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands