Auerswald COMpact 5000R Advanced Information Download

Page: 249 / 1388

Information

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 249 -

Information

The fax function of the PBX supports fax transfer in combination with a

corresponding PC application. The required

COMpact/COMmander Fax

printer driver has to be installed on the PC used.
The

COMpact/COMmander Fax

printer driver transfers the document

to be faxed to the PBX that subsequently saves the document for the

fax box used and sends it in the background using the corresponding

fax identification. If the destination of the fax is not available (busy or no

reply), two further dial-up attempts will automatically be made by the PBX.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands