manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 243 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 243

Using an Internal or External Phone (Remote Access) to Operate and Query a Voice Mailbox

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 243 -

Using an Internal or External Phone (Remote Access)
to Operate and Query a Voice Mailbox

The voice messages of a voice mailbox can be queried by means

of an internal or external phone (remote access). Using various

announcements, the caller is guided through the query menu. Besides

accessing the messages, it is also possible to operate (e. g. switch on and

off) the voice mailbox via phone.
Requirements:
• Imported language file (*.fs)
• Knowledge of the PIN for accessing the corresponding voice mailbox

remotely

• DTMF dialling support on the external phone
 

1. Call the voice mailbox.

Note:

 Remote access is also possible with disabled readiness of a

voice mailbox. External calls will be accepted after a waiting time of at
least 50 seconds (50 seconds or 

Waiting time for CF on no reply

 + 10

seconds if longer than 50 seconds).

2. Dial * and then the user PIN or the PIN for remote access and dial #.

Note:

 If the internal phone used for the query is the owner of the voice

mailbox, it is not necessary to enter a user PIN or remote access PIN.

Various announcements lead you through the remote access menu.

0

Help menu

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments