manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 1375

UDP

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 1375 -

UDP

User Datagram Protocol) - protocoll used to send data packets over

non-secure communication lines without a connection. This means that

successful transmission is dependent on the application and is therefore

not always guaranteed. UDP itself does not verify whether data has been

transmitted successfully. When a UDP packet is sent, the sender cannot

assume that the packet will indeed arrive at the recipient. This particular

protocol needs only a small amount of additional information, and results

in a better data throughput rate in a well-functioning network, e. g., on a

LAN. UDP is used by DNS servers, for example.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands