Information about Transfer via LDAP Server
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 1132 -
Information about Transfer via LDAP Server
For the transfer of contact data from the LDAP server of the PBX to the IP
end device you have to enter the following values into the end device.
For the transfer of all selected contact groups (e. g. in the factory settings).
• User name
cn=auerswaldschandelah,dc=auerswald
• BaseDN
dc=auerswald
• Password
auerswaldsecret
For the transfer of single contact groups (e. g. for contact group
DECT1
):
• User name
cn=DECT1,dc=auerswald
• BaseDN
ou=DECT1,dc=auerswald
• Password is configurable
For the transfer of contacts of a single subscriber (e. g. for the internal
number
31
):
• User name
phoneNumber=31,dc=Subscriber number
• BaseDN
dc=auerswald
• In this case the password is the user password of the subscriber.
Note:
You must enter the complete character string.
Note:
Ensure you type the capital and lower-case letters correctly, and
do not type any blank spaces before or after the
,
and
=
characters.
Summary of Contents for COMpact 5000R
Page 1: ...V13 06 2019 COMpact 5000 R Advanced Information ...
Page 224: ...Tones COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 224 ...
Page 1278: ...B COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1278 B B Channel B Channel ...
Page 1385: ...W COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1385 W WAN WAN ...