Auerswald COMpact 5000R, Advanced Information

Page: 1127 / 1388

Password for the Access via COMfortel DECT IP1040
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 1127 -
Password for the Access via COMfortel DECT IP1040
Nom d’utilisateur IKON
The user name along with the associated password is needed for
authentification of a COMfortel DECT IP1040 on the PBX so that it has
(only read) access to the contact data. The access with other passwords
(e. g. the admin password) is not recommended, as the password is
sent unencrypted by the COMfortel DECT IP1040. The access must be
configured in the Configuration Manager of the COMfortel DECT IP1040
(page
Network/PBX > Additional Servers
under
Phonebook
).
Mot de passe
Freely selectable password that consists of 8 characters containing digits,
letters (upper and lower case, but no German umlauts and ß).
Note: To change current passwords, click on Éditer les mots de
passe .
Note: A coloured bar under the entry field shows the security level of
the password (red = low level, green = high level).
Note: Passwords with a low security level can not be saved.
Caution: A high level does not necessarily indicate a secure password
as this can also be reached by entering names and birth dates in
connection with special characters. However, names and birth dates
should not be used as passwords.