COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
781
Service and Maintenance
Provisioning for IP Telephones
Telephone Identification by MAC Address
Telephone Identification by MAC Address
The MAC address of a telephone is needed to identify a telephone that is assigned to a specific
subscriber. For all transactions between telephone and PBX the PBX must be able to identify
the MAC address of the telephone so that the telephone can be matched to a subscriber and
his/her provisioning data.
If a MAC address has been entered and assigned to a subscriber, the corresponding telephone
can already be provided with provisioning data during its first boot process.
MAC addresses are represented in a byte-by-byte format, with the individual bytes being
separated by colons or hyphens, e. g. 00:09:52:04:4B:13.
Possibilities to read a MAC address:
•
Reading with a bar code scanner
•
Retrieving from a client certificate
•
Manual entry
Reading a MAC Address with a Bar Code Scanner
If the MAC address is printed as bar code on the IP telephones, e. g. on a label on the bottom
of the telephone, you can read and enter this address with a bar code scanner.
Proceed as follows:
•
Using the configuration manager
Requirements:
•
Bar code scanner enabled and connected to the computer (e. g. via a USB interface)
1. Open the page
Subscriber (scr.) > Properties
.
2. In the list field at the top, select the subscriber in question by his/her name or number.
3. Open the page
VoIP settings
.
4. In the
Assigning the MAC address of the device
, click
manual assignment >
Enter MAC address manually
.
5. Read the MAC address of the device with the bar code scanner.
