618
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Settings
ISDN Connection
Settings for Additional Numbers
Additional number
Some countries provide additional numbers for a PTP connection, in addition to the DDI
numbers. The network provider can assign up to ten phone numbers for the connection.
The additional number specifies which character string a caller must dial from the local
telephone network to reach the ISDN PTP connection. These numbers are not attached to the
PBX base number.
Note:
You can input up to 250 external numbers for land line and VoIP
connections in the PBX. In other words, the total maximum number of MSNs,
DDI numbers and additional numbers is 250.
Phone number for CLIP no screening
Requirements:
•
Set up phone number
•
CLIP no screening switched on for the ISDN connection
Customer-specific phone number (e.g. a service phone number) that is transferred to the desti-
nation by the exchange line without its correctness being checked.
Name
The name is used for display purposes on the system telephone.
Ringtone
The ringtone specifies which sequence of sounds is used to signal external calls to internal
subscribers on the PBX.
Note:
See the Settings > Ring tones section for information about exceptions
to signalling and sound sequences.
New
Adds a new phone number.
Delete
Deletes the entries marked in the list.
