572
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Settings
Internet Access
IP Blacklist and Whitelist as Protection Against Attacks from the Internet
• Transfer to IPv4 whitelist
or
Transfer to IPv4 whitelist
to delete the IP address
from the IP blacklist and move it to the IP whitelist.
Setting up an IP Whitelist
Proceed as follows:
•
Using the configuration manager
1. Open one of the following pages:
• Administration > IP black- and whitelist > IPv4 blacklist
• Administration > IP black- and whitelist > IPv6 blacklist
Note:
The IPv6 whitelist will only be displayed, if the use of IPv6 has been
enabled (
Administration > IP configuration
.
2. Click
New
.
3. Enter a new IP address in the
IP address
entry field. Possible entries:
4. Enter the corresponding data in the
Net mask
and
Prefix
entry fields. Possible
entries:
Note:
The subnet mask is entered automatically for a network computer
when you click
Network calculator
. You can then also set the
CIDR suffix
and so the
CIDR notation
.
The values for
Host IP
appear automatically in the list.
5. Click
Save
.
6. Repeat steps 2 to 5 to enter additional IP addresses.
Four blocks with three digits for IPv4 addresses
Eight blocks with four digits or characters for IPv6 addresses
Four blocks with three digits for IPv4 subnet mask
Digits
1
to
128
for prefix
