380
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Functions
InterCom Announcement/Hands-Free
Initiating InterCom Announcement/Hands-Free
Initiating InterCom Announcement/Hands-Free
Proceed as follows:
•
Using a character string on the internal telephone
•
Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
•
Enabled InterCom authorisation at the InterCom destination
1. Pick up the receiver.
2. Dial one of the following character strings:
3. Enter the internal number of the system telephone. Possible entries:
The system telephone automatically takes the call after a single ring.
Switching InterCom Permission On/Off
If InterCom permission is enabled, InterCom announcement or InterCom hands-free calling is
enabled on the InterCom destination in question.
Proceed as follows:
•
Separately for subscribers (system telephones)
•
Using the configuration manager
•
Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
•
System telephone that supports InterCom (optional, see telephone manual)
1. Open the following page:
##011
: Initiates an InterCom announcement.
##012
: Initiates InterCom hands-free.
Internal number of the individual system telephone
(for exchange line
request type Direct exchange line telephone: with preceding **)
