COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
379
Functions
InterCom Announcement/Hands-Free
InterCom Announcement / InterCom Hands-Free Calling
InterCom Announcement/Hands-Free
The InterCom function enables an announcement to system telephones (one telephone or
group) from any internal telephone without someone having to actively receive a call (for
example, in a doctor's office).
Furthermore, the caller's system telephone can be programmed to switch on the microphone
in addition to the loudspeaker (hands-free) so that a person nearby can speak with the caller
using this intercom system.
InterCom Announcement / InterCom Hands-Free Calling
InterCom announcement and InterCom hands-free are carried out as follows:
•
A single system telephone or a group is called using the InterCom function.
Note:
If a group is called using the InterCom function, all system telephones
of the group that have given the InterCom permission and are ready to take
calls will be called. The group status (logged in, logged out) will not be taken
into account. Hands-free calling is not possible in the case of an InterCom call
to a group.
•
After a few rings, the system telephone/system telephones of the group members automat-
ically pick up the call.
•
Announcement or hands-free calling is executed.
Note:
Announcement or hands-free calling is limited to 120 seconds due to
security reasons in order to prevent possible misuse of this function
(for example, eavesdropping from remote rooms).
•
After 120 seconds has elapsed, the connection is automatically interrupted unless the
system telephone receiver is picked up during this time.
