COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
127
Introduction to the Configuration Manager
Configuration Manager
Configuration Wizard
Subscriber
When the PBX is released for the first time, it automatically creates subscribers and phone
number for each plugged-in module it detects.
You can delete the proposed subscribers and create your own subscribers with phone number
and name, and assign them to a module, a port and a device type. The corresponding PINs
and passwords are assigned automatically. You can change, but not delete them.
Possible device types:
•
ISDN telephone
•
ISDN system telephone
•
ISDN PC controller
•
DECT system telephone
•
Fax machine
The configuration wizard does not offer the following device types for configuration. They must
be configured under
Devices
:
•
Voice mail/fax boxes
•
Door terminals
•
Announcement outputs
•
Alarms
•
Switch inputs
•
Relays
You can make further settings under
Subscriber (scr.) > Phone numbers
.
For further information, click one of the help topics.
Call Distribution
In call distribution, you specify which internal subscribers should be given the signal for an
incoming external call. You can configure both one telephone for multiple phone numbers and
multiple telephones for one phone number to ring.
To this end, you can select one of the exchange line settings configured in step 6,
Public
switched tel. networks
, in the list fields next to
Call distribution for
.
Note:
A linear call distribution is automatically preconfigured for PTP connec-
tions. If you prefer a different call distribution, you can configure it in the
