Auerswald COMpact 2206 USB, Installation And Configuration Manual

Page: 56 / 68

56
Key Functions with LED Display
Return to the Default Factory Settings
If the other problem solving tips cannot help you, it is possible to initial-
ize the PBX with a push on a button. Hereby all settings will be reset-
ted into the default factory settings (administrator and subscriber
password are maintained). How this default factory setting and the inter-
nal telephone numbering plan look like in detail can be learned on
page 36 .
Perform a Reset of the PBX
In contrast to removing the 230 volt power plug, the supply voltage will
not be interrupted by performing the reset this way. All internal and
external connections, recalls and exchange line reservations will be
deleted in case of a reset. All configurations done by configuration pro-
gram or by telephone will remain valid. The same is valid for the call
data memory.
Press the Select key
often until the LEDs
show the function
„default factory set-
tings“.
Select „default fac-
tory settings“
Press enter key (app.
2 seconds) until the
status LED glows red/
orange.
Function „default fac-
tory settings“ is exec-
tuted.
Reset/Initializing
(some seconds)
Default level of the
LED display
Select
Enter
red/
orange
Press the Select key
often until the LEDs
reflects the function
„Reset“
Select the function
„Reset“
Press enter key (app.
2 seconds) until the
status LED glows red/
orange.
Reset/Initializing
(some seconds)
Default level of the
LED display
Select
Enter
red/
orange