16
Creating a Basic Configuration
햶
Now click on „Exchange line numbers“ in the left window pane. The
window content appearing is dependent the kind of connection
(Point-to-point connection, Point-to-multipoint connection or
mixed).
You have to enter the country code and area code into entry fields
at the top of the window.
Point-to-point connection: In case of a Point-to-point connection
(a base number with additional Direct Dial Inward numbers) you
have to enter your base number without area code into the column
„PtP base number“ of the first table.
If you have two ISDN exchange lines with the same base number
(COMpact 4410 USB with 2 external S
0
ports only), please enter
these separately and activate both check boxes in the column „bun-
dle“.
(The reception number, e.g. „0“, is not part of the base number, but
is a Direct Dial Inward number.)
The Direct Dial Inward numbers received from the network provider
are entered into the column „MSN/DDI“ of the following table.
(If
you have the Direct Dial Inward number block 1-99 and use the 1,
the numbers 10-19 are not available anymore) Assign an S
0
port to
each number by activating a check box in the column „S
0
1, ...“. (If
you have a trunk bundle for S
0
ports 1 and 2 on a COMpact 4410
USB both columns are activated simultaneously.)
Example:
Point-to-multipoint connection: In case of one or two Point-to-
multipoint connections you have to enter your MSNs without area
code into the column „MSN/DDI“. Assign an S
0
port to each number
by activating a check box in the column „S
0
1, ...“.
햷
Now click on „internal telephone numbers“ in the left window pane.
You can create internal subscribers in this table by entering the
number and assigning this number to a port (select analog or S
0
ports in the column „Module“, select port number in the column
„Internal port“ and kind of device in the corresponding column).
The two-digit numbers 10-59 and the three-digit numbers 100-599
are available. The usage of two-digit numbers reduces the available
amount of three-digit numbers. Example: If the number 11 is
assigned, the numbers 110-119 (Emergency numbers!) are not
available anymore.
The program can also generate a rising list of numbers (enter the
smallest number, step into the name entry field to the right with the
right arrow-key and start the function by clicking the right mouse
key).
The 1st MSN entered into individual Auerswald system tele-
phones, ISDN telephones as well as ISDN PC-controllers
must match with here created internal number (please consult
the
chapter Configuration of ISDN Devices on page 18
besides this
make sure that this 1st MSN of the corresponding device is also pre-
sented to the PBX.
05306 / 9200 - 0
area code
base number
DDI number
햶
PtP connection
PtmP connection
☞
햷
Summary of Contents for COMpact 2206 USB
Page 66: ...884250...
Page 67: ......
Page 68: ...884250 03 03 04 Save the Earth 100 recycled paper...
