background image

View and change your Settings via Web Interface

Look at the Telephone Book of the PBX

65

Note: The viewing of these presented pages can be restricted by
the administrator.

To open the telephone book of the PBX, click on “COMtools

Telephone book 

Overview“ in the tree. 

The telephone book is sorted correspondingly to the Short-
code dialling numbers (if existing). If you like to sort the tele-
phone book according to the names or telephone numbers,
click on the corresponding headline of the column.

If you do not like to scroll through all entries, you are able to set
under “Lines per page“ how many entries you like to look at on
one page at the same time. By clicking on the arrow buttons or
by selecting under “Page:“ you can browse through the single
pages.

Note: The viewing of these presented pages can be restricted by
the administrator.

Click on “COMtools 

Telephone book 

DECT telephone

book“ at the left side of the tree. This page only exists if you
have a COMfortel DECT 900/900C or COMfort DECT 800.

Activate the telephone book entries in the right column that you
like to copy into the telephone book of your COMfortel DECT
900/900C or COMfort DECT 800. 

If you have selected the requested entries on one page (the
possible total number is stated in the headline of the column),
confirm them via mouse click on the field “Execute“ in the
action line.

Now the PBX starts copying the data to the telephone. If the
handset is currently not ready for a data transfer (switched off
our or out of reach), the PBX will try it later again until the data
is transferred. During the data transfer (duration: 1-3 minutes)
a status message, e. g. "Copying from PBX", is displayed.

Note: The viewing of these presented pages can be restricted by
the administrator.

To open the Call Restrictors and the Call Deblockers, click on
COMtools 

Special numbers 

Overview“ at the left side

of the tree. 

The available Call Restrictors or Call Deblockers are pre-
sented. 

Look at the Telephone Book of the PBX 

Copy Telephone Numbers of the PBX Telephone Book into the Telephone Book of a DECT System telephone

View Call Restrictor and Call Deblockers

Summary of Contents for COMmander Basic





















































































Reviews:

Related manuals for COMmander Basic