Make Calls with normal Telephones and change Settings
Change the Music on Hold/Announcement
55
Note: Depending on the length of the announcement it may take
some time to load. During this time you will hear two short tones every
5 seconds.
Note: This function will delete the existing welcome message imme-
diately. The announcement may have a maximum length of 20 sec-
onds. After 20 seconds, the recording will be stopped automatically
and you will hear the acknowledgement tone. If you are using a
shorter welcome message, you can stop the recording by hang-up or
pressing the
#
key.
The announcement is recorded directly from the receiver of an inter-
nal telephone.
Note: If you delete any recorded wake-up announcements, the
default wake-up announcement is automatically activated.
Note: Depending on the length of the announcement it may take
some time to load. During this time you will hear two short tones every
5 seconds.
Listen to the Announcement for Text before Answering
b ##8s *57 T # f
Sub-Admin PIN
No. 1-10
of the
announcement
You hear the
announcement
Record the Wake-up Announcement
b ##8s *562 W?* f * g # f
Sub-Admin PIN
No. 1-3
of the
announcement
You hear the
acknowledge-
ment tone
Start the
recording
Record the
requested text
Stop the
recording
Waiting tone and
following replay of
the recording
Delete Wake-up Announcement
b ##8s *552 W #
Sub-Admin PIN
No. 1-3
of the
announcement
Listen to Wake-up Announcement
b ##8s *572 W # f
Sub-Admin PIN
No. 1-3
of the
announcement
You hear the
announcement
