Auerswald COMmander Basic, Operator'S Manual

Page: 25 / 84

Make Calls with normal Telephones and change Settings
Connect a 3rd Call during a Query
25
Note: If the 3rd call partner hangs up beforehand, you will also return
to the previously active call partner. If you additionally dial
F 1
then,
you also disconnect the call with this partner.
Note: If the 3rd call partner is not ready to be transferred, you will
return to the normal Query with
F 1
.
If you do not dial
?F 4
in the 3rd call but hang up, the 2nd and 3rd
call partner will also be connected. Then the 1st call will be signalled
by the PBX like an external call. An internal call will be disconnected.
If the 3rd call partner is busy, you will be able to put the 2nd call part-
ner into the Waiting Field with
?F 47
(compare with chapter Internal
Subscriber is busy – Put the external Call Partner into the Waiting
Loop on page 23
).
Finish 3rd Call and return to the Query
v F 1 q
3rd call
(see
p. 24 )
return to the previously active call partner (Query)
– 3rd call partner is disconnected
or
F 2 o
return to the previously call partner on hold
(Query) – 3rd call partner is disconnected.
Connect the 3rd Call Partner with the 2nd one
v F 4 g
3rd call (see p. 24 ) call with the 1st call partner - 2nd and 3rd call partner are connected
Only continue to talk to the 3rd Call Partner
v F 0 g
3rd call (see p. 24 ) Call with the 3rd call partner - 1st and 2nd call partners are disconnected