952
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – User Data
Address Books
Settings Address Book Transmission for DECT Handsets
Proceed as follows:
•
Using the Configuration Manager (page
User data > Address books >
Contacts & assignment
)
Requirements:
•
Base station COMfortel DECT IP1040 operated on the PBX
•
COMfortel DECT 900/900C Handsets
•
For users: read access for those contact groups whose entries are to be
transmitted to the phone books of the handsets
•
Configured password for the access via COMfortel DECT IP1040
–
Using the Configuration Manager (page
User data > Address
books > Settings
)
Note:
The access with other passwords (e. g. the admin password) is
not recommended, as the password is sent unencrypted by the
COMfortel DECT IP1040. The access must be configured in the Config-
uration Manager of the COMfortel DECT IP1040 (page
Network/PBX >
Additional Servers
under
Phonebook
).
•
Configured
DECT system phone
or
IP DECT system phone
–
Using the Configuration Manager (page
Subscriber (scr.) > Phone
numbers
)
•
Contact groups of the type
COMfortel DECT 900 Handsets
and/or
COMfortel DECT 900C Handsets
in the address books
