COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
747
Settings – Devices
Door Terminals
If a door call should also be executed via VoIP accounts or GSM
gateways, in any case the external number must be entered with the
corresponding city code, even if it is the local prefix.
Click
Ok
.
Note:
To create further configurations for a door call or the corre-
sponding switch input, click
in the line of the corresponding door call.
The configuration is described below and in the chapter Functions >
Switch input.
Deletes the switch input or opens the configuration of the door call.
Settings Door Terminal
Proceed as follows:
•
Separately for door terminals
•
Using the Configuration Manager (page
Devices > Door terminals >
Configure
)
Requirements:
•
Created door terminal
