COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
723
Settings – Devices
Voice mail/fax boxes
Message recipients
E-mail transfer @Test
The e-mail addresses of up to 10 message recipients can be entered for e-
mail transfer. Subsequently, a test e-mail can be sent to check whether the
e-mail transfer to the message recipients entered works without fault.
Requirements:
•
Configured DNS server (under
Administration > IP configuration
)
•
Configured outgoing mail server (under
Administration > E-mail >
Outgoing mail server
)
Note:
The PBX enters sent e-mails in a log file (page
Monitoring > System
messages
).
E-mails sent by the PBX may be treated as spam mail by the recipient
of the message.
