COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
631
Settings – Subscriber (scr.)
Properties / Function overview
Call take-over
This is reasonable for the pick-up of calls to answering machines, fax
machines or modems.
If call take-over is enabled for an answering machine and this answering
machine takes a call earlier than a subscriber, the subscriber may take this
call back from the answering machine. The answering machine will receive
a busy signal then.
No
Calls of this subscriber may not be taken over.
Global
Calls of this subscriber may be taken over by every other phone.
Group(s)
Calls of this subscriber may be taken over by members of groups the
subscriber is also member of. It does not make any difference if the
subscriber is currently logged-in or -out.
InterCom (announcement/hands-free calling)
Requirements:
•
System phone that supports InterCom (optional, see phone manual)
The subscriber takes automatically an InterCom call directed to him.
Transmission of the display name
Requirements:
•
VoIP device with entered display name
