COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
617
Settings – Subscriber (scr.)
Properties / Function overview
Charge pulse
AOCD - enabled
Switches on the conversion of charge information sent during the call into
charge pulses. The subscriber can evaluate the charge information sent to
them by the network provider transferred to display the charges they incur.
AOCE - as soon as possible
Switches on the conversion of charge information send at the end of the call
into charge pulses. The subscriber can evaluate the charge information sent
to them by the network provider transferred to display the charges they
incur.
No
Switches off the conversion of the transferred charge information into
charge pulses.
Note:
If the network provider sends charge information during and at the end
of the call (AOCD) and you have specified this for the subscriber, it may
happen that not all the charges can be sent before the call is ended. The
remaining information is then transferred at the beginning of the next
call.
The charge pulse option should be switched off (
No
) for faxes and
modems to prevent transfer problems.
You will hear a slight crackling on the line when the charge pulse is
switched on.
