COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
59
Functions, Uses, Concepts
Remote Configuration and Alternative Connection Options
phone's COMfortel Set configuration software on the PC you are going to
use.
Configuring internal ISDN System Phones Remotely via a PBX's
External S
0
Port
You can remotely configure the ISDN system phone indirectly via an
external ISDN connection using the PBX and a device which is connected
to both the external S
0
port on the PBX and to the PC (for example ISDN PC
controller). The PBX must be configured accordingly. Before you can do
this, you must install the ISDN system phone's configuration software on the
PC you are going to use.
Configuring the PBX Remotely with (Auerswald) Remote Access
Server via the Internet
Requirements:
•
PBX with existing connection to the Internet (DSL)
•
In the PBX configured external PIN and remote switching number and
also enabled dealer access over the Internet
–
Using the Configuration Manager (page
Administration > Remote
configuration
)
•
Computer with existing connection to the Internet (DSL)
•
DTMF-capable phone or DTMF dialler
•
Access data for registration at protected Auerswald services
•
Knowledge of the serial number of the PBX
•
Knowledge of user name and password for the Configuration Manager
