COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
589
Settings – Subscriber (scr.)
COMfortel DECT
3. Enable the
Logout
check box for the corresponding subscriber.
4. Click
Save
.
Note:
If the mobile handset is logged out, the unnecessary internal
number can be deleted (
Subscriber (scr.) > Phone numbers
).
Using the Configuration Manager to Configure a Function Key
for PBX Functions
The
function key on a COMfortel DECT 900/900C Handset can be
assigned to up to ten programming functions on the PBX.
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
COMfortel DECT 900 Base connected to the internal S
0
port
•
COMfortel DECT 900/900C Handsets
•
Configured and assigned internal numbers for the COMfortel DECT
900/900C Handsets
1. Open the page
Subscriber (scr.) > COMfortel DECT
.
2. Select the DECT base in the list field under
DECT base
.
3. Click
Assign keys
in the line of the corresponding mobile handset.
