COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
587
Settings – Subscriber (scr.)
COMfortel DECT
Assigning Internal Phone Numbers to COMfortel DECT 900/900C
Handsets
The phone numbers assigned to a COMfortel DECT 900 Base must be
assigned to the corresponding COMfortel DECT 900/900C Handsets.
Note:
If you are setting up a COMfortel DECT IP1040 Base, you must
first assign phone numbers to the handsets under
Subscriber (scr.) >
Phone numbers
before you log in the handsets to the base station.
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
COMfortel DECT 900 Base connected to the internal S
0
port
•
COMfortel DECT 900/900C Handsets
•
Configured internal numbers for the COMfortel DECT 900/900C
Handsets
1. Open the page
Subscriber (scr.) > COMfortel DECT
.
2. Select the DECT base in the list field under
DECT base
.
3. Select the phone number created for a DECT subscriber using the
name/number in the list field under
IPUI of the handset / serial
number of the handset
.
4. Enter the identification number of the mobile handset in the entry field
under
IPUI of the handset / serial number of the handset
.
