Auerswald COMmander 6000 Advanced Information Download Page 500

Page: 500 / 1164

500

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Public switched tel. networks

Voice over IP (VoIP)

Inband

The PBX uses the same channel to transfer the DTMF signals and the voice
data (DTMF tones).

Outband (RFC 2833)

The PBX uses different channels to transfer the DTMF signals and the voice
data. The DTMF tones are filtered out of the voice data.

Both procedures

The PBX transmits the DTMF signals on two channels (1st contains DTMF
tones together with the voice data + 2nd contains the DTMF signal).

Echo Cancellation



This compensates for local echoes and reverberation effects.

Jitter buffer (40 to 160)

The size of the jitter buffer specifies how many RTP packets can be cached,
to buffer disruptions or compensate for them.

Codec settings

Requirements:

•

external VoIP channel that supports different codecs (optional, see
Technical Data in the Instructions)

•

VoIP provider who supports the different codecs

Summary of Contents for COMmander 6000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMmander 6000

Reviews:

Brands by name

Popular brands

Auerswald COMmander 6000, Advanced Information

Search results

Summary of Contents for COMmander 6000

Reviews:

Brands by name

Popular brands